Automatic Folding Carton Diecutting & Creasing Machines

BRAUSSE 1060ER Automatic Diecutting & Creasing Machine with Blanking and Stripping Device


  • Three pick up and four forward suck heads with angle adjustment to handle different kinds of materials

  • 360彩票网官网Preloading device with rail cart and scaled gate

  • 360彩票网官网Manually side adjustment of pallet table (+/- 40 mm)

  • Non-stop feeder with automatic pile lift

  • Side blowers adjustable according to sheet size for smooth feeding, especially for smooth thin paper transport


  • 360彩票网官网Sheet slow down device of feeder belts to assure accurate position of the sheet to the front lays (electro-pneumatically adjustable)

  • 360彩票网官网Synchronizing device to adjust the sheet positioning to the front lay by hand during production

  • Covered with an anti-static stainless steel plate

  • Feed table inlet equipped with lateral ramps

  • 360彩票网官网Four individually adjustable front lays at the operation side of the machine

  • Ultra sonic double sheet detector (without contact)

  • 360彩票网官网Sheet hold-down device (guiding the sheets to the front lays)

  • 360彩票网官网Upper frame with manual lifting device

  • Pull and push convertible side lays ( OS and OOS ) with photo sensor sheet arrival control


  • 360彩票网官网Precision worm gear crank toggle driving system to ensure smooth and dynamic lower platen movement

  • Short stroke movable platen, driven by eccentric worm gear and toggle mechanism allows large motion angle hence minimum number and size of nicks at reasonable max. production speed

  • 360彩票网官网Precision stationery upper platen

  • 360彩票网官网State-of-art 3 cam index gripper bar drive system to ensure smooth and precise gripper bar intermittent movement

  • Pneumatic clutch/brake for main drive system

  • Motorized cutting force setting by push button

  • 360彩票网官网Digital strain gauge die cutting pressure tonnage display at HMI with adjustable pressure limit protection

  • 360彩票网官网Eight high precision alloy gripper bar

  • 360彩票网官网High quality pre-stretched gripper bar drive chain

  • 360彩票网官网Torque limit safety clutch to protect the index drive system in case of gripper bar crash

  • Double cam driven gripper opener and front lay swing frame without position restore spring for smooth and accurate sheet register and take off

  • 360彩票网官网Pneumatic push button die chase locking mechanism to ensure safe and operator friendly changing of the die

  • 5mm hardened cutting plate or 4+1mm sandwich plate (optional) on top of 15mm precision synthetic supporting plate with +/-0.9mm micro adjustment for quick set up and make ready

  • 360彩票网官网Automatic main chain greasing system


  • 360彩票网官网Complete set of stripping tools with upper and lower stripping pins

  • Centre line system for quick stripping die set up

  • Integrated Quick Locking System

  • Automatic quick locking device for the upper tool integrated in the machine

  • 360彩票网官网Funnel for waste guidance

  • Efficient and smooth cam running curve drives the stripping and blanking tooling with large motion angle to ensure clean and tiny stripping and blanking at speed


  • Automatic binder sheet inserter with electrical sheet presence control

  • Automatic selection of suction cups according to the sheet size

  • 360彩票网官网Constant compression level system (NCT)

  • 360彩票网官网Continuous pile lowering whist maintaining a constant height of the pile

  • Automatic pallet changing device

  • 360彩票网官网Automatic non-stop device

  • 360彩票网官网Waste or skeleton removal apron

  • Integrated Quick Locking System

  • 360彩票网官网Upper blanking tool mounting frame can be pulled out for quick job set up and make ready

  • 360彩票网官网Full sheet delivery can be achieved with die cutting and stripping only, while blanking is not necessary.

Maximum Sheet Size:1060x760 mm
Minimum Sheet Size:400x350 mm
Maximum Cutting Size:1060x745 mm
Inner Chase Size:1080x770 mm
Stock Range: 
Paper (depending on quality), min.:90 g/m2
Board (depending on quality), up to (*):1000 g/m2
Corrugated Board, up to (*):4 mm
(*) Carton acceptable wrap2% of the width wise sheet: 
Minimum Gripper Margin:9~17 mm
Cutting Rule Height:23.8 mm
Minimum Width of Double Cuts:5 mm
Maximum Mechanical Speed:6500 cycles/hour (subject to working environment, sheet    quality and operation skills, etc.)
Designed Maximum Mechanical Speed:7500 cycles/hour
Maximum Cutting Pressure:260 tons
Maximum Pile Height at Feeder - Normal Mode:1800 mm
Maximum Pile Height at Feeder - Non-stop Mode:1520 mm
Maximum Pile Height at Delivery:1580 mm
Total Power Required:26 kw
Main Motor Power:15 kw
Net Weight of Machine:22000 kg
Gross Weight of Machine:25000kg
Machine Dimensions:9249(L)x6036(W)x2640(H) mm (incl. Catwalk)


Domestic Sales:
86 21 59502461
International Sales:
86 21 64262538
86 21 59502477

Contact Us


Domestic Sales:
86 21 59502461
International Sales:
86 21 64262538

© 2016 Shanghai Eternal Machinery CO., LTD.

More Inquiries

Didn’t find the information you need?

Please send emails to